IOTW CD 211
From Insulator Wiki (Wikilator)
| Revision as of 16:07, 3 February 2008 Billmeier (Talk | contribs) (→Details) ← Previous diff |
Revision as of 00:19, 4 February 2008 Billmeier (Talk | contribs) (→Details) Next diff → |
||
| Line 13: | Line 13: | ||
| ==Details== | ==Details== | ||
| - | [[image: cd 211 junky.jpg|thumb|right|CD 211 filled with junk!]] | + | [[image: cd 211 junky.jpg|180px|right|CD 211 filled with junk!]] |
| '''Embossing:''' (f) Brookfield (b) No Leak D./Patented | '''Embossing:''' (f) Brookfield (b) No Leak D./Patented | ||
Revision as of 00:19, 4 February 2008
Contents |
Insulator of the Week
CD 211 - Fri, 1 Feb 2008
Nickname
No Leak
Related Patents
Utility Patent 882,803 issued to Leonard W. Storrer on March 24, 1908
Details
Embossing: (f) Brookfield (b) No Leak D./Patented
These are found in shades of aqua, green aqua and near green. Only a small number have been found with notable amounts of bubbles or inclusions. The one on the right is an unusual example.
This is a two-piece design with a glass insert. As described in the patent info, the glass insert was designed to fit into the underside of the insulator to maintain a dry and clean zone within the inner skirt area, thus the name "No Leak". This, of course, was for the prevention of current leakage due to wet weather or the build up of debris, such as spider webs. Due to the fragile nature of the insert, there are many Brookfield No Leaks in the hobby that lack a matching insert. I'll stretch my neck out and say at least half, maybe more, of the No Leaks known are "insert-less", with some inserts having been repaired. PicturePoster #178151641
It appears that a good number of the No Leaks found in collections today have originated from the Stampede Pass line in Washington State. Other reports indicate spotty finds near Norwich, NY and "near an oil refinery in CA".
A special dual pin assembly is reported to have been used with this insulator on the Stampede Pass line: PicturePoster #115995826
Following is a link from the Crown Jewels of the Wire archives. This article was written by Elton Gish in the May 1986 issue. Note the locations of the test lines. Anyone know of any being found specifically in these areas? Who knows, maybe the first ones tested were porcelain?
There was a report in a 1970 issue of Crown Jewels that a rubber gasket or washer was found with a No Leak and insert. Can anyone verify that a washer was used?
These brief comments on the Insulator of the Week are not intended to be complete and are presented to encourage discussion and additional information from ICON. Now it's your turn to share info and/or post photos of your favorite CD 211 Brookfield No Leak!
