Hemingray CD 162 Dark Yellow Green PG $300-350. There are four chips to the insulator ranging from a pinky nail size to about half that size. There are located in the back in the wire groove, at the back of each mold ...
Posted by Mike Gaudy on August 10, 2020 - 0.6kb
Hemingray CD 162 Dark Yellow Green PG $300-350. There are four chips to the insulator ranging from a pinky nail size to about half that size. There are located in the back in the wire groove, at the back of each mold ...
Posted by Mike Gaudy on August 10, 2020 - 0.6kb
CD 134 T-H.E. CO. signal insulator
Front skirt: T-H.E. CO.
Top of dome a backward "2" which is somewhat ghosted
Smooth base
{MLOD} mold line over dome
Aqua
Milky snotty swirl starts mid-way ...
Posted by Timothy M. Baggett on August 5, 2020 - 0.5kb
Pair of American Insulator Co 145s
One aqua example. Has typical pricks on it from use, tiny bit of WG wear. Has one very shallow 1/2 inch inner skirt chip. Also has inner skirt underpour.. Has a slight cold mold ...
Posted by Kyle Waters on August 4, 2020 - 0.6kb
Watery Sage Green DOMER. A few bites, 2 sliced drips and a small factory mold flaw on the side lower wire ridge....$35. Plus actual postage......More pics if needed.
Posted by Alan Riegler on August 4, 2020 - 0.2kb
Here are a pair of H.G. 145's with some internal "Stuff"
Left piece is a light aqua piece that has a shower of rain-like inclusions starting in the dome in a clump and ending in a cotton ball-like tadpole ...
Posted by Peter Persoff on August 4, 2020 - 0.6kb
For sale i have a nice bright orange amber Hemi-19 [090]. It has some nice milk swirls throughout the insulator. The only issue is the upper wire ridge at right mold looks to have a small internal fracture, otherwise ...
Posted by Ken Gardner on August 3, 2020 - 0.3kb
A little while back I was fortunate to win an auction with these porcelain beauties. From left to right: two different sized tab type Kretzer Brands. One was probably a later mold slightly smaller. A nice mottled brown ...
Posted by James A Lindsey Jr on August 2, 2020 - 0.4kb
Here's an unlisted Baby Mickey Mouse glass insulator from France. Embossed FOL (upside down) and 553 (reverse skirt) with the "3" looking like a blob as it is engraved over another number. The FOL is an ...
Posted by (private) on August 2, 2020 - 0.9kb
Here's a Deep Olive Green CD 671 T-Bar insulator embossed ISOREX (front) 246 (reverse). Easy VNM condition with no chips or cracks! Has typical factory grind marks along upper mold lines with 2 micro tic marks and light ...
Posted by (private) on August 1, 2020 - 0.4kb
CD 162 HG Co signal in a gorgeous glowing orange. Just a pinhead peck and a half chipped drip on this vnm beauty. A super long stringer of glass from the gather entered the mold first, leaving a really cool impression ...
Posted by Dwayne Anthony on July 30, 2020 - 0.4kb
Here is a minty CD 102 EIN [250] (F‑Skirt) HEMINGRAY/No 9 (R‑Skirt) PATENT/MAY 2 1893 SDP in unlisted Milky Blue Aqua. It's not quite Hemingray Blue, but it's certainly bluer than plain Aqua. A light ...
Posted by Chris Cotnoir on July 30, 2020 - 0.5kb
Mint......$40 plus post.
Posted by Alan Riegler on July 29, 2020 - 0.0kb
This probably was among the last pintype insulators manufactured by Hemingray. As you can see it has nine dots following the 1957 mold date which brings us to 1966.
It is very possible Hemingray made a big, final ...
Posted by Joe Maurath, Jr. on July 27, 2020 - 0.7kb
On the left is a Light Aqua EIN [051] (Dome) [glass dot] (F‑Skirt) W. BROOKFIELD (R‑Skirt) NEW YORK SB. This has a milk worm that starts in the right front, goes up and over the side of the pinhole, ...
Posted by Chris Cotnoir on July 27, 2020 - 1.6kb
Some refer to this as a lighter Eaton blue for where a few were found near Eaton Colo some time back. Overall nice with very shallow, very small, flake on part of base near mold line. Very shallow, very hard to see, ...
Posted by Matthew Poage on July 27, 2020 - 0.4kb
Nice CD 728 in aqua. Very nice condition overall. A little patch of olive over the dome. A small wire rub with some remaining rust (1/2 inch long). Some light roughness/tiny flakes around the base mold line (very common ...
Posted by Kevin Piell on July 26, 2020 - 0.4kb
I love these crude carved mold light greenish gray dry process styles made by the R. Thomas & Sons Company circa 1910 thru the 1910's. Pictured here are U-18, U-191, U-239, U-267 and U-294A.
Posted by Michael Green on July 25, 2020 - 0.2kb
Here's a RARE unlisted CD 642 Forest Green Gingerbread Man with the Masonic Symbol on the dome. No this is not a weak embossed VM. Very clear, strong embossing and rare as hen's teeth! Close-up of masonic symbol . Has ...
Posted by (private) on July 24, 2020 - 0.9kb
Big bold embossing L mold in a RICH TEAL GREEN. Two needle point ticks are the only flaws!! $ 185.00 includes shipping.
Posted by Robert W Baumann on July 23, 2020 - 0.1kb
Here is a hard to find CD 154 (Tall Mold) in Sage Green with the No-40 Style Number on the rear. As you know, this was one of William McLaughlin's first CD 154's with the SB and not yet switched to the No 42 yet. ...
Posted by Bob McLaughlin on July 22, 2020 - 0.3kb
Hemingray 19 cobalt blue ein [230] VNM only 1 drip chipped on the inside 1 very small surface clam shell type chip below the M in May at the base and a small area behind the right mold line at the base where it looks ...
Posted by Mark Andersen on July 20, 2020 - 0.4kb
Here's a CD 145 Star beehive in a deep yellow green. These Postal styles are usually not found in the darker colors. This piece has a fair amount of dome glass, and lots of tiny champagne bubbles in the dome, which come ...
Posted by Kenneth Willick on July 20, 2020 - 0.5kb
CD 152 BROOKFIELD telegraph insulator
Front skirt: BROOKFIELD
Round base. MLOB
DARK YELLOW GREEN
Has a chip on the upper wire rim on the right side mold line (see photo)
Also, a round ping on the rear ...
Posted by Timothy M. Baggett on July 19, 2020 - 0.3kb
This is a great toll that I could never see upgrading, especially with this factory imperfection that McLaughlin certainly is not known for!
This is EIN [010] and has a 4 in rear wire groove and an elongated carbon ...
Posted by Zac Mirecki on July 18, 2020 - 1.0kb