![]() |
Here we have a top of the line display case. Best bulbs, best diffuser, best ballast, best shelves. 4 - 5000K Daylight Bulbs with 86 Color Rendering Index and 30,000 hour life rating. 1/4 inch thick sign grade milky white plexiglass diffuser that will not yellow over the years. One - four bulb electronic ballast that will run quietly and cooler than the older magnetic ballast. 4 - 1/2 inch thick Starphire (almost crystal clear) glass shelves four inches by 48 inches. Optional custom box for storing and transporting glass shelves to and from shows. (Extra $50) Or optional glass storage cubbyhole built inside the toekick area. (Extra $40) Made with 3/4 inch cabinet grade oak plywood and trimmed out with solid oak. Six vent holes on the back to keep air moving. The bulbs and ballast run very cool, but a lighting engineer at Philips lighting told me the cooler you keep things the longer they will last. Your choice of stain color. Otherwise, the standard finish is a Golden Oak (shown). Smooth back with rounded edges for easy sliding into and out of vehicles. A single light switch is on the side with a power outlet right below the switch for easy power access. Recessed switch on back is a $40 option. Approximate dimensions are 49.5" wide, 35" tall, and 12.75" deep. You can get 110 ponies, or 90 tolls, or 80 beehives/signals in the case. My price is $720, which is basically the material and a little for my labor. My material costs have gone up considerably since I last listed these on the gallery, thus the higher price. I still believe you won't find a better price for the same size case. I will deliver this to the St. Joe show on March 12th. Otherwise, we will have to figure something else out. I will not ship this as I have way to much blood sweat and tears invested to have it demolished by a shipper. Picture is of an identical case made previously. Your case is being built. Your options include: stain color, switch location (right side, left side or recessed on back), and glass storage box or cubbyhole. |