Here is a shot of the rear damage. Note: The folds and dark lines in the phot are from wirnkles in the glass and the coolness of the glass as it was poured into the mold and are not to be considered damage.

Here is a pretty sapphire blue no name MLOD 'Canadian Boston'. This crude, heavy piece has some small bubbles and a bit of junk floating around in it with a bit of a milk swirl over the pinhole.

Damage consists of a 1 1/2" rear base bruise, with a 5/8" chip and a 3/4" flake associated with it on the base. There are 2 small flakes on the front base. There is a smallish 3/8" clam shell flake on the upper wire ridge above the bruise and 2 wire rubs on the lower wire ridge on the back as well. There is a dome ping and dome roughness as if this might have rolled around on the floorboard of a car for a bit. Still this is in pretty good condition for these and except for the bruise area the other damage is not very noticeable.

Additional photos upon request.

Price: $250 includes shipping and insurance (if desired) to your door. Seven day refund minus shipping/insurance if not satisfied.

Also, please look at my other insulators that I have for sale at good prices: Ice Aqua w/ Purple Swirls HG CD 151: [id=131893647] Ice Aqua HGCO signal: [id=131894265] Medium Green HG Petticoat Beehive: [id=131889488]