This older type wooden pole substation in Moro, Oregon had new poles and wire installed on the line leading to it, due to a street curb and sidewalk upgrade in this small, rural town. I don't know what the line builders were thinking, but note the extreme excess of loose wire on the feeder lines. So much, in fact, that a good high wind, (not uncommon there) may just wrap up all three wires! G-ZAP!!!!! I can only conclude that they may have been afraid of pulling over the old wood structure, or they went to after work Beer:30 early, then came back and wired it! Voltage in is 24,000. Voltage out is 2400/4160Y. What ever happened to wiring craftsmanship, anyway? This really looks terrible and had I been their inspector, I would NOT have accepted it. No how, No way, Never.